Contact Us

Tel:+86-573-83662988

Fax:+86-573-83662166

Mobile:+8618867662604

Email: eric@jx-jiaqi.com

Add: No.218 PingNan Road, Jiaxing, Zhejiang, China

Home > News > Content
Sine Wave Controller Strict Current Limit Aug 31, 2017

Sine Wave Controller Strict current limit

First, the main function:

1, fault detection and protection. The LED flashing code can be used to identify faults.

2, the battery voltage real-time monitoring. The battery voltage is too high or too low will stop working.

3, built-in current detection and overcurrent protection.

4, the controller with temperature measurement and protection. At high temperatures, current cuts will be made to protect the controller and the battery. If the controller temperature is higher than 90 ℃, the current will drop sharply, reaching 100 ℃ will automatically cut off the output.

5, in the power generation, the voltage will always be in the state of the controller monitoring. If the voltage is found to be too high, the controller will immediately cut the current until the power is stopped.

6, can be connected to the computer through the serial port to configure the parameters of the controller.

7, 3 switch inputs are high level brake input, low level brake input and two speed switching input.

8, 1 0-5V analog input, that is, turn the analog signal input.

9, can be configured energy-saving mode. As a power saving mode, the battery current can be selected as a large current for a half current mode.

10, can be configured burglar alarm function. In the alarm state, shake the body or forced to drive the wheel, the system into the alarm state, the motor will be electric brake.

11, enhanced power generation brake function. The original ABS brake technology makes your brakes more powerful and smooth.

12, 3-phase Hall position sensor input, open collector output, the controller provides pull-up resistor, 5V power supply.

Second, the characteristics

1, ultra-quiet, super power.

2, powerful intelligent microprocessors.

3, strict current limiting and torque control.

4, limit the battery current function, will not trigger the battery current limit protection, extend battery life.

5, a larger start-up current, can get faster start-up speed.

6, anti-electromagnetic interference, anti-vibration performance.

7, fault indicator light indicates a variety of failures, user-friendly detection and maintenance.

8, with battery protection: When the battery voltage is low will be timely current attenuation, too low to stop the output to protect the battery.

9, with over-temperature protection: When the temperature is too high or too low will automatically carry out current attenuation to protect the controller and battery.

10, compatible with 60 degrees or 120 degrees Hall position sensor.

11, support any number of brushless motor.

12, in operation, in the acceleration switch to release or brake, there will be regenerative current generated, the battery charge.